We work with the best brands in the market, then we provide a wide range of options and technical characteristics, aesthetic and functional where to choose.

You can directly query the system catalog available for windows, doors and facades clique aqui.

From the wide range of door-post systems we highlight two of the most requested systems by our customers: The Ari and Aji systems.

System ARI

Door-post system with thermal break and high thermal and acoustic performance.

The ARi system allows the execution of five versions of frames:
• Straight line;
• Curved line;
• Tradition line;
• Oval line;
• Hidden line.

The ARi system allows the application of double glazing or triple high yield in order to meet the requirements of thermal and acoustic insulation.
The ARi Hidden Leaf version allows the concealment of the mobile frame.

Aluminium profiles

- The aluminum profiles are extruded in 6060 aluminum alloy according to NP EN 12020-02 architecture.
- Thermal Breakage obtained by insertion of insulating rods polyamide type Omega with 24 mm, reinforced with 25% glass fiber
- Average thickness of 1.5 mm aluminum profiles for windows and 1.7 mm for doors.

Fixed hoops

- Section of fixed hoops 60 mm or 84.5 mm with triple chamber;
- Fixed hoops with double brackets to mount the miter;
- Traditional fixed hoops to domestic market;
- Fixed hoops with foreign direct shot clip and flap of 25 mm or 45 mm;
- Fixed rims with exterior and interior for clip shot application of 30 mm.

Mobile hoops

- Movable hoops section of 68 mm with triple chamber;
- Filling for double or triple glass from 10 mm to 45 mm for the system ARi;
- Filling for double glazing up to 23 mm for ARi Leaf Hidden system;
- Straight mobile hoops, bow, tradition or oval (without  bite);
- Mobile hoops with double brackets to mount the miter;
- Inverter profile of straight line.

Design and maneuverability

- Minimum dimensions - maximum sheet: 400 mm - 1500 mm (L); 400 mm - 2700 mm (H);
- Opening options: fixed, internal fitting 1 or 2 sheets with inward-stop, outdoor, dump, projecting, pivoting, harmonium inward-parallel;
- Tightness ensured by triple gaskets in EPDM.

Performance

- Certified system by a notified laboratory for testing Initial type (ITT) according to the product standard EN 14351-1 for the purposes of CE marking.

System AJI

Door-post system with thermal rupture - 70 mm.

System features

- Stop system with thermal break to high thermal and acoustic benefits;
- The AJI system allows the execution of three versions of frames: • Straight line; • Curved line; • oval line;
- The AJI system allows the application of double glazing or triple high yield in order to meet the requirements of thermal and acoustic insulation;
- With optimum thermal insulation combined with the application of an innovative product called baguette ThermoProfile, aji System provides high performance comfort and energy savings.

Aluminium profiles

- The aluminum profiles are extruded in 6060 aluminum alloy according to NP EN 12020-02 architecture.
- Thermal Breakage obtained by insertion of 24 mm insulating rods polyamide type Omega reinforced with 25% glass fiber;
- The average thickness of 1.7 mm aluminum profiles.

Fixed hoops
-
70 mm section of the fixed frames with triple chamber;
- Profiles with thermal break with sticks of polyamide type Omega with 24mm;
- Fixed rims with double square quick grip and alignment brackets for mounting the miter;
- Crossbars with dual union for more effective grip;
- Traditional fixed hoops for the internal market;
- Fixed hoops with foreign direct shot clip and flap of 25 mm or 45 mm for the French market;
- Fixed bezel with outdoor and indoor clip shot for the application of 30, 50 or 80 mm for the French market;
- Fixed rim connection to the system to run with CW thermal break.

Mobile hoops
-
Section of mobile frames of 78 mm with triple-chamber;
- Mobile frames with thermal break through polyamides type omega 24mm rods;
- Mobile rims with double square quick grip and alignment brackets for mounting the miter;
- Profile inverter with eye for better implementation of the top inverter.

Design and maneuverability
-
Minimum dimensions - maximum sheet: 340 mm - 1700 mm (W); 340 mm - 3000 mm (H);
- Maximum weight to windows or balcony doors with inward-stop up to 170 Kg;
- Maximum weight for entry doors up to 160 kg / leaf;
- Opening options: fixed, internal fitting 1 or 2 sheets with or without inward-stop, outer stopper, dump, projecting, harmonium inward-parallel;
- Profile solution for pedestrian doors or interior opening balcony or outdoor according to standard PMR (handicapped);
- Filling for double glazing or triple from 20 mm to 55 mm;
- Tightness ensured by double gaskets in EPDM (indoor and central).

* Information obtained in the Anicolor site

From the wide range of sliding systems we highlight the most requested by our customers: The CT system, the CW system and the Kristal.

CT System

Aluminum system with thermal break to perform spans running.

Aluminium profiles

- The aluminum profiles are extruded in 6060 aluminum alloy according to NP EN 12020-02 architecture.
- The thermal break profiles are obtained by insertion of insulating rods 6.6 mm polyamide reinforced with 25% glass fiber;
- Versatile thermal break system with hoops and perimeter leaves or straight cut called Benelux, is the system indicated for innovative architectural solutions today;
- Average thickness of 1.5 mm aluminum profiles.

Fixed hoops

- Fixed hoop section of perimeter of 2 guides of 60mm to mount the miter;
- Profiles with thermal break obtained by insertion of polyamide insulating rods with 14.6 mm or 18 mm;
- Lower sliding guide profile in 304 stainless steel or polyamide to prevent wear of parts.

Rolling hoops

- Perimeter of the rolling hoops with 33.1 mm to mount the miter;
- Filling of 18 mm to 26 mm;
- Straight or curved rolling hoops with or without bite;
- Tightness ensured by joint TPE and / or plush type Sin-Feal.

Design and maneuverability

- Maximum weight of 150 kg per sheet (with two double bearings);
- Opening possibilities: 2, 3, 4 and 6 sheets with mobile and / or fixed leaves;
- Double oscillating bearing with regulation;
- Stainless steel needle roller bearings with hardened shaft rectified with possible replacement without disassembly sheet;
- Outside support with cataphoresis treatment (anti-corrosive);
- Opening of the aperture or side closure hardware with multi-point closure 2 or 4 points.

Performance

- Certified system by a notified laboratory for testing Initial type (ITT) according to the product standard EN 14351-1 for the purposes of CE marking

CW System

Aluminum system with thermal break to perform spans running.

Aluminium profiles
-
The aluminum profiles are extruded in 6060 aluminum alloy according to NP EN 12020-02 architecture.
- Profiles with thermal break obtained by insertion of insulating rods 6.6 mm polyamide reinforced with 25% glass fiber 30 mm in fixed frames and 14.6 mm in mobile frames.
- Average thickness of 1.5 mm aluminum profiles.

Fixed hoops
-
Section of the perimeter fixed hoop 2 guides with 105 mm for mounting the miter;
- Lower sliding guide profile in AISI 304 stainless steel to prevent wear of parts.

Rolling hoops
- Rolling hoops perimeter section of 48 mm with mounting the miter;
- Filling 4 to 36 mm;
- Straight mobile rings with or without bite or reduced bite;
- Straight bites;
- Tightness ensured by EPDM gaskets and plush Fin-Seal typel.

Design and maneuverability
-
Minimum dimensions - maximum sheet: 300 mm - 2500 mm (W); 350 mm - 2675 mm (M);
- Maximum weight of 200 kg per sheet (with 2 double bearings);
- Types 2, 3, 4 and 6 mobile and / or fixed leaves;
- Galandage running typologies of 1 or 2 leaves;
- Double oscillating bearing with regulation;
- Needle roller bearings in stainless with hardened shaft rectified with the possible replacement without disassembly sheet;
- Outside support with cataphoresis treatment (anti-corrosive);
- Opening of the aperture or side closure hardware with multi-point closure 2 or 4 points;
- Deflected handles (left or right) for multi-point hardware enabling ease of opening;
- Medium-sized lifting hardware application possibility;
- Specific handle to lift hardware in order to facilitate the opening and closing maneuvers of the aperture;
- There is a double handle option with cannon placement with a key to allow the opening of the will from the outside.

Kristal System

Sliding system minimalist concept with Thermal Break - 120mm

Aluminium profiles
-
The aluminum profiles are extruded in 6060 aluminum alloy according to NP EN 12020-02 architecture;
- Thermal break profiles obtained by insertion of insulating rods polyamide reinforced with 6.6 mm with 25% of fiber glass of 14.6mm in the fixed frames and 18mm in mobile frames;
- The average thickness of 2.0 mm aluminum profiles.

Fixed hoops
-
Fixed perimeter section frame 120 mm with bi-rail mount the miter;
- Application possibility of inside or outside trim;
- Lower profile sliding guide in aluminum with double bearings of high performance stainless steel 316.

Rolling hoops
-
Rolling hoops section of very small view with straight cutting assembly by clamping;
- Glass pack with a secondary silicone sealing of 32.4 mm to 32.8 mm of total thickness, consisting of toughened outer glass types or thermoset laminate and inner glass thermo-hardened or tempered;
- Rail glued polymer around the perimeter of the insulating glass with black silicone structural;
- Recommended structural silicones Dow Corning 791 black or black Sikasil SG20;
- Reinforced rims of contemporary line for high sizing.

Design and maneuverability
-
Minimum dimensions - maximum sheet: 300 mm - 3000 mm (W); 500 mm - 3000 mm (M);
- Weight of 300 kg per leaf;
- Types 2, 3 or 4 movable and / or fixed leaves;
- Opening chance at corner;
- Sliding system of minimalist concept with slip sheets on the aluminum profile made with stainless steel bearing high performance for easy opening will even with extreme settings of weight or size;
- Types of spans with more than 95% Brightness;
- Air permeability and water tightness ensured through state-plush and joins in marine quality EPDM;
- Multipoint hardware with multiple locking points and easy to apply and regulation;
- Hardware multipoint with micro-ventilation included in all locking points;
- Specific handle for easy opening maneuver and closing the gap;
- There is the option to handle key to permit opening of the aperture from the outside.


* Information obtained in the Anicolor site

Facade systems are geared for coating buildings where you want transparency and natural light. We have several solutions ranging from the traditional model to modular elements that combine versatility and aesthetic quality and safety.

Structural façade (glass front wall)

System features

In this system the glazing is realized by racks in which is placed a specially anodised profile to allow bonding of structural silicone. Thus, the glass completely hides profiles, acquiring this type of facade, an exterior view only of glass, thereby providing a type EGG effect - Exterior glued glass.

The section of the amounts and crossbars is 65 mm, visible only from the inside.

Both profiles show drainage and ventilation channels which ensure, with the system of EPDM joints a maximum tightness and permeability. Optionally available is a special security profile that avoids the glass shear. Possibility of profiles with thermal break.

Semi-Structural façade (glass front wall)

System features

Facade system in which profiles are used for the manufacture of sheets with a tab fixing the glass, avoiding the use of structural silicone. The section of the outer view of this system is 12 mm or 21 mm. The section of the amounts and crossbars is 65 mm, visible only from the inside. Both profiles show drainage and ventilation channels that ensure the system along with EPDM seals, a maximum tightness and permeability. Possibility of profiles with thermal break.

Opening options
Projecting opening held by stainless steel bars with a resistance up to 180 kg, both fixed and projecting leaves are manufactured with the same perimeter profile, making it unnoticeable its distinction from the outside.

Inverted front wall

System features

In this system the glazing is held by a back cover glass for fixing and support the structure. On this profile is placed an outer wrapper, horizontally and vertically, thereby forming an exterior view in two dimensions. The visible in the interior and exterior of the amounts and crossbars is 65 mm. Both profiles show drainage and ventilation channels that ensure the system along with EPDM seals a maximum tightness and permeability.

Opening options

This type of façade, unlike all other, enables any kind of opening provided by Anicolor systems. The window is fixed to the frame profile with the aid of pressing the glass fixing to the facade. There is also the possibility of realizing projecting openings "hidden", that is not visible from outside.

 

Milénio façade (glass front wall)

System features

Light façade system, where the outer glass is fixed by means of clamps and clamping pieces, fixed or bearings. The clamps, made of stainless steel are fixed to the glass holder parts. The glass, tempered and / or pre-laminate is machined to permit its attachment to the structure. The attachments have the following advantages:

• make it easy the placement of the glass;
• cushion deformations produced in the glass (wind pressure, swelling, ...);
• allow to correct construction defects.

The supporting structure on which the clamps are fixed is formed by vertical aluminum profiles with high thickness of 65 mm portion visible. This thickness gives these profiles a high moment of inertia, allowing buildings with large distances between supports. This system is complemented with other profiles and joints that allow you to perform the most varied constructive solutions.

Opening options
This system does not offer possibility of opening.

Ventilated façade

System features

System of ventilated structural facade, with the structure completely hidden from the outside. It incorporates a chamber with 140 mm between the inner and outer glazing, allowing a natural ventilation of the façade in the upward direction, and a reduced heat transfer from the outside to the inside. The inner section of the amount is 50 mm.

Contemplates the possibility of openings for accessing the interior ventilation chamber for cleaning and for accessibility and placement of air filters. The fastening system consists of two pieces of high thickness to ensure a full facade adjustment at the time of fixation.

Opening options
• Interior opening: Stop;
• Outer opening:. Projecting held by stainless steel bars with a resistance of 150 kg Fixed and projecting sheets are manufactured with the same perimeter profile, thus providing a blurring the outside.

Ergolux façade (glass front wall)

System features

This system uses the fundamental principle of drainage channels and ventilation of front systems. Complemented with profiles that allow adopt different solutions, both skylights as on balconies. Can thus generate up new spaces with great luminosity. The profiles of this system have a visible inner section of 65 mm, while the depth varies according to the needs of the static calculation (supporting structure, snow load, wind area, etc.

Meet the solutions for tub and shower that we have to install in a new or remodeling bathroom. You can consult our catalogs where you can choose the right solution for your project.

Acrylic

We work with the best brands specializing in solutions for shower cabins and acrylic bathtub.

 

Vidro temperado

If you prefer a solution using toughened glass, we also have several solutions that can choose for best fits to your project.

 

Automations for swing gates

Are irreversible electromechanical automations for swing gates are ideal for frequent and intense use. Silent and robust, simple installation and connections perfectly adapt to any kind of solution, even complex, for example, sheets held by pillars "out of position" or large.

Automations for slidding gates

The sliding gates require flexible automations, able to control various dimensions, different types of duty and different environmental conditions, always ensuring maximum operational safety, functionality and reliability.

Automations for sectional doors

They are the ideal solution to automate their own garage door. Easy to install, robust and reliable, it is able to move with 1 or 2 gearmotors, the overhead doors with counterweights, the total re-entry, or, articulated, even large dimensions.
In the event of a power failure the automation always lets you perform the manual operation unlocking the gearmotor through an internal lever, or else a custom key out. Moreover, they are optional reference systems available to metallic rigid rod or cord to be connected to this handle on the door.

 

Automations for folding doors

São automações electromecânicas irreversíveis para portões com batente são ideais para um uso frequente e intenso. Silenciosas e robustas, simples na instalação e nas ligações se adaptam perfeitamente a qualquer tipo de solução, mesmo complexa, como, por exemplo, folhas seguradas por pilares “fora de posição” ou de grandes dimensões.

 

We have the experience and knowledge of technical experts in the area of restoration and repair of antique furniture, doors and windows in wood. Of the many works carried out, in a perspective of before-after we have to show you some work already done:

We belong to a network of official installers and accredited company certified Teccarsa with over 25 years of experience in the manufacture of windows and doors in PVC systems. We offer our customers several solutions: Windows and doors, gates elevating runners, inward-parallel doors in various colors and types of finishes.

Safety, comfort and ergonomics

All elements of the hardware of pvc windows and doors manufactured by TECCARSA have an integrated central locking, offering a wide security.

 

The new blind box system

 

Corporate Video of Teccarsa