From the wide range of sliding systems we highlight the most requested by our customers: The CT system, the CW system and the Kristal.

CT System

Aluminum system with thermal break to perform spans running.

Aluminium profiles

- The aluminum profiles are extruded in 6060 aluminum alloy according to NP EN 12020-02 architecture.
- The thermal break profiles are obtained by insertion of insulating rods 6.6 mm polyamide reinforced with 25% glass fiber;
- Versatile thermal break system with hoops and perimeter leaves or straight cut called Benelux, is the system indicated for innovative architectural solutions today;
- Average thickness of 1.5 mm aluminum profiles.

Fixed hoops

- Fixed hoop section of perimeter of 2 guides of 60mm to mount the miter;
- Profiles with thermal break obtained by insertion of polyamide insulating rods with 14.6 mm or 18 mm;
- Lower sliding guide profile in 304 stainless steel or polyamide to prevent wear of parts.

Rolling hoops

- Perimeter of the rolling hoops with 33.1 mm to mount the miter;
- Filling of 18 mm to 26 mm;
- Straight or curved rolling hoops with or without bite;
- Tightness ensured by joint TPE and / or plush type Sin-Feal.

Design and maneuverability

- Maximum weight of 150 kg per sheet (with two double bearings);
- Opening possibilities: 2, 3, 4 and 6 sheets with mobile and / or fixed leaves;
- Double oscillating bearing with regulation;
- Stainless steel needle roller bearings with hardened shaft rectified with possible replacement without disassembly sheet;
- Outside support with cataphoresis treatment (anti-corrosive);
- Opening of the aperture or side closure hardware with multi-point closure 2 or 4 points.

Performance

- Certified system by a notified laboratory for testing Initial type (ITT) according to the product standard EN 14351-1 for the purposes of CE marking

CW System

Aluminum system with thermal break to perform spans running.

Aluminium profiles
-
The aluminum profiles are extruded in 6060 aluminum alloy according to NP EN 12020-02 architecture.
- Profiles with thermal break obtained by insertion of insulating rods 6.6 mm polyamide reinforced with 25% glass fiber 30 mm in fixed frames and 14.6 mm in mobile frames.
- Average thickness of 1.5 mm aluminum profiles.

Fixed hoops
-
Section of the perimeter fixed hoop 2 guides with 105 mm for mounting the miter;
- Lower sliding guide profile in AISI 304 stainless steel to prevent wear of parts.

Rolling hoops
- Rolling hoops perimeter section of 48 mm with mounting the miter;
- Filling 4 to 36 mm;
- Straight mobile rings with or without bite or reduced bite;
- Straight bites;
- Tightness ensured by EPDM gaskets and plush Fin-Seal typel.

Design and maneuverability
-
Minimum dimensions - maximum sheet: 300 mm - 2500 mm (W); 350 mm - 2675 mm (M);
- Maximum weight of 200 kg per sheet (with 2 double bearings);
- Types 2, 3, 4 and 6 mobile and / or fixed leaves;
- Galandage running typologies of 1 or 2 leaves;
- Double oscillating bearing with regulation;
- Needle roller bearings in stainless with hardened shaft rectified with the possible replacement without disassembly sheet;
- Outside support with cataphoresis treatment (anti-corrosive);
- Opening of the aperture or side closure hardware with multi-point closure 2 or 4 points;
- Deflected handles (left or right) for multi-point hardware enabling ease of opening;
- Medium-sized lifting hardware application possibility;
- Specific handle to lift hardware in order to facilitate the opening and closing maneuvers of the aperture;
- There is a double handle option with cannon placement with a key to allow the opening of the will from the outside.

Kristal System

Sliding system minimalist concept with Thermal Break - 120mm

Aluminium profiles
-
The aluminum profiles are extruded in 6060 aluminum alloy according to NP EN 12020-02 architecture;
- Thermal break profiles obtained by insertion of insulating rods polyamide reinforced with 6.6 mm with 25% of fiber glass of 14.6mm in the fixed frames and 18mm in mobile frames;
- The average thickness of 2.0 mm aluminum profiles.

Fixed hoops
-
Fixed perimeter section frame 120 mm with bi-rail mount the miter;
- Application possibility of inside or outside trim;
- Lower profile sliding guide in aluminum with double bearings of high performance stainless steel 316.

Rolling hoops
-
Rolling hoops section of very small view with straight cutting assembly by clamping;
- Glass pack with a secondary silicone sealing of 32.4 mm to 32.8 mm of total thickness, consisting of toughened outer glass types or thermoset laminate and inner glass thermo-hardened or tempered;
- Rail glued polymer around the perimeter of the insulating glass with black silicone structural;
- Recommended structural silicones Dow Corning 791 black or black Sikasil SG20;
- Reinforced rims of contemporary line for high sizing.

Design and maneuverability
-
Minimum dimensions - maximum sheet: 300 mm - 3000 mm (W); 500 mm - 3000 mm (M);
- Weight of 300 kg per leaf;
- Types 2, 3 or 4 movable and / or fixed leaves;
- Opening chance at corner;
- Sliding system of minimalist concept with slip sheets on the aluminum profile made with stainless steel bearing high performance for easy opening will even with extreme settings of weight or size;
- Types of spans with more than 95% Brightness;
- Air permeability and water tightness ensured through state-plush and joins in marine quality EPDM;
- Multipoint hardware with multiple locking points and easy to apply and regulation;
- Hardware multipoint with micro-ventilation included in all locking points;
- Specific handle for easy opening maneuver and closing the gap;
- There is the option to handle key to permit opening of the aperture from the outside.


* Information obtained in the Anicolor site