Facade systems are geared for coating buildings where you want transparency and natural light. We have several solutions ranging from the traditional model to modular elements that combine versatility and aesthetic quality and safety.

Structural façade (glass front wall)

System features

In this system the glazing is realized by racks in which is placed a specially anodised profile to allow bonding of structural silicone. Thus, the glass completely hides profiles, acquiring this type of facade, an exterior view only of glass, thereby providing a type EGG effect - Exterior glued glass.

The section of the amounts and crossbars is 65 mm, visible only from the inside.

Both profiles show drainage and ventilation channels which ensure, with the system of EPDM joints a maximum tightness and permeability. Optionally available is a special security profile that avoids the glass shear. Possibility of profiles with thermal break.

Semi-Structural façade (glass front wall)

System features

Facade system in which profiles are used for the manufacture of sheets with a tab fixing the glass, avoiding the use of structural silicone. The section of the outer view of this system is 12 mm or 21 mm. The section of the amounts and crossbars is 65 mm, visible only from the inside. Both profiles show drainage and ventilation channels that ensure the system along with EPDM seals, a maximum tightness and permeability. Possibility of profiles with thermal break.

Opening options
Projecting opening held by stainless steel bars with a resistance up to 180 kg, both fixed and projecting leaves are manufactured with the same perimeter profile, making it unnoticeable its distinction from the outside.

Inverted front wall

System features

In this system the glazing is held by a back cover glass for fixing and support the structure. On this profile is placed an outer wrapper, horizontally and vertically, thereby forming an exterior view in two dimensions. The visible in the interior and exterior of the amounts and crossbars is 65 mm. Both profiles show drainage and ventilation channels that ensure the system along with EPDM seals a maximum tightness and permeability.

Opening options

This type of façade, unlike all other, enables any kind of opening provided by Anicolor systems. The window is fixed to the frame profile with the aid of pressing the glass fixing to the facade. There is also the possibility of realizing projecting openings "hidden", that is not visible from outside.

 

Milénio façade (glass front wall)

System features

Light façade system, where the outer glass is fixed by means of clamps and clamping pieces, fixed or bearings. The clamps, made of stainless steel are fixed to the glass holder parts. The glass, tempered and / or pre-laminate is machined to permit its attachment to the structure. The attachments have the following advantages:

• make it easy the placement of the glass;
• cushion deformations produced in the glass (wind pressure, swelling, ...);
• allow to correct construction defects.

The supporting structure on which the clamps are fixed is formed by vertical aluminum profiles with high thickness of 65 mm portion visible. This thickness gives these profiles a high moment of inertia, allowing buildings with large distances between supports. This system is complemented with other profiles and joints that allow you to perform the most varied constructive solutions.

Opening options
This system does not offer possibility of opening.

Ventilated façade

System features

System of ventilated structural facade, with the structure completely hidden from the outside. It incorporates a chamber with 140 mm between the inner and outer glazing, allowing a natural ventilation of the façade in the upward direction, and a reduced heat transfer from the outside to the inside. The inner section of the amount is 50 mm.

Contemplates the possibility of openings for accessing the interior ventilation chamber for cleaning and for accessibility and placement of air filters. The fastening system consists of two pieces of high thickness to ensure a full facade adjustment at the time of fixation.

Opening options
• Interior opening: Stop;
• Outer opening:. Projecting held by stainless steel bars with a resistance of 150 kg Fixed and projecting sheets are manufactured with the same perimeter profile, thus providing a blurring the outside.

Ergolux façade (glass front wall)

System features

This system uses the fundamental principle of drainage channels and ventilation of front systems. Complemented with profiles that allow adopt different solutions, both skylights as on balconies. Can thus generate up new spaces with great luminosity. The profiles of this system have a visible inner section of 65 mm, while the depth varies according to the needs of the static calculation (supporting structure, snow load, wind area, etc.